MNS低壓抽屜柜是一種常用的電力配電設備，針對其速斷定值的修改，需要按照以下步驟進行操作：
MNS low-voltage drawer cabinet is a commonly used power distribution equipment. To modify its quick break setting, the following steps need to be followed:
1. 確認權限：要確定你是否有操作權限進行修改。在一些應用場合中，速斷定值的修改可能需要特定的資質和權限。
1. Confirm permissions: First, determine if you have operational permissions to modify. In some applications, the modification of quick break settings may require specific qualifications and permissions.
2. 斷電操作：在進行任何電氣設備的操作之前，務必先切斷電源，確保操作。關閉電源，確認抽屜柜內部沒有電流通過。
2. Power off operation: Before carrying out any electrical equipment operation, be sure to cut off the power supply to ensure safe operation. Turn off the power and confirm that there is no current flowing inside the drawer cabinet.
3. 掌握參數：了解當前的速斷定值以及需要修改為的目標值，包括額定電流、過載保護定值、短路保護定值等。
3. Master parameters: Understand the current quick break setting and the target values that need to be modified, including rated current, overload protection setting, short circuit protection setting, etc.
4. 進入設置模式：根據抽屜柜的型號和，可以使用設備上的操作面板或者連接到計算機進行配置。進入相應的設置模式，通常需要輸入密碼或進行身份驗證。
4. Enter setup mode: Depending on the model and brand of the drawer cabinet, it can be configured using the operating panel on the device or connected to the computer. Entering the corresponding setting mode usually requires entering a password or performing authentication.
5. 尋找速斷定值設置選項：在設置模式下，尋找相應的速斷定值設置選項。不同的和型號可能會有不同的操作方式和菜單結構，需要按照設備說明書或生產廠家提供的操作手冊進行操作。
5. Search for quick break setting options: In the setting mode, search for the corresponding quick break setting options. Different brands and models may have different operating methods and menu structures, which need to be operated according to the equipment manual or the operation manual provided by the manufacturer.
6. 修改速斷定值：在速斷定值設置選項中，根據實際需求修改相應的參數值。根據設備的操作界面，可通過按鈕、旋鈕或者鍵盤輸入等方式進行數值的修改。
6. Modify the quick break setting value: In the quick break setting option, modify the corresponding parameter values according to actual needs. According to the operation interface of the device, numerical modifications can be made through buttons, knobs, or keyboard input.
7. 確認修改并保存：在修改完速斷定值后，確認修改的數值是否正確，并保存設置。根據設備的操作界面，通常會有保存或確認修改的選項。
7. Confirm modification and save: After modifying the quick break setting value, confirm whether the modified value is correct and save the settings. According to the operation interface of the device, there are usually options to save or confirm modifications.
8. 測試驗證：完成速斷定值的修改后，可以進行必要的測試驗證，確保設備在新的速斷定值下正常工作和保護?？梢阅M過載或短路情況，觀察是否能夠及時斷開電路。
8. Test verification: After completing the modification of the quick break setting, necessary test verification can be carried out to ensure that the equipment operates and protects normally under the new quick break setting. It can simulate overload or short circuit situations and observe whether the circuit can be disconnected in a timely manner.
需要注意的是，以上步驟僅供參考，具體操作方法可能因設備型號、和廠家的不同而有所差異，建議在操作之前詳細閱讀設備說明書或咨詢廠家的技術支持人員，以確保正確和地進行速斷定值的修改。
It should be noted that the above steps are for reference only, and the specific operation methods may vary depending on the equipment model, brand, and manufacturer. It is recommended to read the equipment manual carefully or consult the manufacturer's technical support personnel before operation to ensure correct and safe modification of the quick break setting.
TEL:0531-69922480
EMAIL:jntyhc@163.com 
公司地址：濟南市槐蔭區經十西路3788號
備案號：魯ICP備09028695號-3
魯公網安備37010402441282號
首頁
產品
電話
置頂